Reinitialize your Holosun EPS Carry Red Dot Sight

Wiki Article

Occasionally, you may require to reinitialize your Holosun EPS Carry Red Dot sight to its factory settings. This can be helpful if you've been tinkering with the settings or are experiencing unexpected performance. Fortunately, resetting your Holosun is a simple process that can be achieved in just a few procedures.

• First ensuring your red dot sight is turned on.
• Locate the small reinitialize button on the bottom of the sight.
• Use a small object to depress the reset switch for approximately 5 milliseconds.
• Let go the lever and your Holosun EPS Carry Red Dot sight will power cycle.
• Its red dot sight should now be reverted to its factory settings.

Return to Your Holosun EPS Carry Red Dot to Defaults

In case you've tweaked your Holosun EPS Carry red dot settings and want to return to original, resetting it to its factory configuration is a breeze. First, locate the tiny button on the bottom of your optic. Then, press and hold it for around five seconds until you see a brief flash. Your Holosun EPS Carry is now returned to its factory settings, ready for accurate shooting.

restore Your Holosun EPS Carry Back to : Functionality

Is your beloved Holosun EPS Carry experiencing some performance problems? Don't despair! A simple factory reset can often solve the problem and get your red dot sight back to its former glory. Before you begin, remember to detach the battery from your Holosun EPS Carry to prevent accidental activation during the process.

To perform a factory reset on your Holosun EPS Carry, follow these simple steps:

• Simultaneously press and hold the power button for approximately 5 seconds.
• An indicator will flash, indicating that the reset is in progress.
• Let go of the power button once the reset is complete.

Your Holosun EPS Carry should now be back to its factory settings. You can connect the battery and verify your sight's functionality. If you encounter any further difficulties, don't hesitate to contactHolosun's customer support.

Restore Factory Settings on Your Holosun EPS Carry: A Step-by-Step Guide

Resetting your Holosun EPS Carry to factory settings can be a helpful solution if you're experiencing issues with the optic or simply want to start fresh. This process erases all user configurations and returns the sight to its original state. Before proceeding, remember to note down any customizations you have made as they will be lost during this process. Follow these steps carefully to ensure a successful factory reset.

• First, Turn on your Holosun EPS Carry by pressing the power button.
• Next, press and hold both the mode button and the up/down adjustment button simultaneously.
• As you continue holding these buttons, press the power button once.
• A message will show a confirmation prompt indicating that the reset process is initiated.
• Allow the process to finish. This may take a few moments. Once done, your Holosun EPS Carry will automatically deactivate.

After resetting your Holosun EPS Carry read more to factory settings, you will need to re-enter any desired customizations, such as brightness levels and reticule style. Refer to the user manual for detailed instructions on configuring your optic after a reset.

Reset All Settings on Your Holosun EPS Carry

To Original reset your Holosun EPS Carry sight, you'll need to access the settings menu. This can usually be done by Holding a specific button combination. Consult your Instruction for the exact button sequence for your model. Once in the settings menu, look for an option that says "Clear Settings". Select this option and confirm the reset. Your sight will then power off and restart with all settings Reinitialized to their default values.

Reinitialize your Holosun EPS Carry via a Factory Default Settings

If your Holosun EPS Carry is acting erratically, a factory reset might be the fix. This will return your sight to its original settings, clearing any altered configurations you've made. To perform this reset, observe these straightforward steps:

• To begin, find the reset lever on your EPS Carry.
• Then, press a fine object, like a pen tip, to activate the reset switch.
• While maintain the reset switch activated, activate your EPS Carry.
• It will flash a message indicating that the reset is successful.

Once the reset is finished, your EPS Carry will be set to its factory settings.

Report this wiki page